Page 1
Christie Vive Audio LA1 Speaker U s e r M a n u a l 020-101261-03...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Observe load ratings and all applicable local safety codes. • Only use attachments or accessories specified by Christie. • To reduce the risk of system damage, turn off the power amplifier and then disconnect the speaker wire before performing a repair or maintenance.
What’s in the box? This table lists the components that are shipped with the LA1. Quantity Description Part number Christie LA1 speaker 145-106108-XX Christie LA1 speaker with grill 145-124108-XX Christie Vive Audio LA1 Speaker User Manual 020-101261-03 Rev. 1 (10-2016)
2. Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the speaker. Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug terminations. Christie Vive Audio LA1 Speaker User Manual 020-101261-03 Rev. 1 (10-2016)
Wall mount bracket (MM-060) 111-682208-XX Wall mount bracket (MM-120) 111-693200-XX 3. Mount the speaker to the wall using the manufacturer documentation provided with the bracket. LA1 speaker Wall mount bracket Christie Vive Audio LA1 Speaker User Manual 020-101261-03 Rev. 1 (10-2016)
Verify that there are no missing screws. Replace all screws that you removed during installation. • Have an authorized dealer complete an audio test (for example, pink noise, frequency sweeps, and content and program material). Christie Vive Audio LA1 Speaker User Manual 020-101261-03 Rev. 1 (10-2016)
Reroute audio cables away from AC power and lighting cables. • Verify correct gain structuring of B Chain and input and output levels of source devices and amplifiers. • Check the polarity. Christie Vive Audio LA1 Speaker User Manual 020-101261-03 Rev. 1 (10-2016)
95 dB Sensitivity , 1 W/1 m Recommended amplifier power 450 W - 825 W (FTC) at 8 Ohms / Christie CDA3 or Christie CDA5 (depending on application) Rated impedance 8 Ohms Measured at distances of 4m and 8m, in free field and on ground plane. Sensitivity is calculated based on measured SPL response averaged in the 200 Hz-3 kHz range and scaled back to 1 m.
82.9 cm x 23.8 cm x 26.4 cm (32.6 in.) x (9.4 in.) x (10.4 in.) Weight (net) 18 kg (39.5 lb) Parts Specification Part Number 5.25 in. woofer 003-120885-XX TWTR Bridge Kapton LA1 003-121033-XX Christie Vive Audio LA1 Speaker User Manual 020-101261-03 Rev. 1 (10-2016)
Need help?
Do you have a question about the Vive Audio LA1 and is the answer not in the manual?
Questions and answers