Installation Section; Checking Your New Griddle; Installation Clearances; Gas Connection(S) - Magikitch'n MKG24 Installation & Operation Manual

All options built after august 1, 2005
Table of Contents

Advertisement

Installation
MKG Series Gas Griddle

1. Installation Section

1.1.

Checking Your New Griddle

Your new griddle has been carefully packed into one crate. Every effort has been made to ensure that
your new griddle is delivered to you in perfect condition. As you unpack your new appliance, inspect each
of the pieces for damage. If something is damaged, Contact the shipper immediately; the shipper is only
responsible for 15 days after delivery. Check the packing list enclosed with your griddle to ensure that you
have received all the parts to the griddle. If you are missing any parts, contact the dealer from whom the
griddle was purchased.
In the provided spaces on the cover of this manual, fill in the Model No., Serial No., and the date the
appliance was purchased. The Information is located on the Data plate on the inside cabinet wall, see
Figure 1 below. Keep this information in a safe place so it can be referred to in the future.
REMOVE GREASE BOX
1.2.

Installation Clearances

Your new MagiKitch'n Griddle needs clearance around it for proper operation. Adequate clearances allow
for servicing and proper burner operation. The clearances shown below are for installation in combustible
and non-combustible construction.
Location
Cabinet back
Cabinet Sides
Ensure that all clearances stated on the Data plate and in the clearance section of this manual are strictly
followed.
1.3.

Gas Connection(s)

Your gas appliance will give you peak performance when the gas supply line is of sufficient size to
provide the correct gas pressure. The gas line must be installed to meet the local building codes or
National Fuel Gas Code ANSI Z223.1 Latest Edition. In Canada, install the appliance in accordance with
CAN/CGA-B149.1 or .2 and local codes. Gas line sizing requirements can be determined by your local
gas company by referring to the National Fuel Gas Code, Appendix C, Table C-4 (for natural gas) and
Table C-16 (for propane). The gas line needs to be large enough to supply the necessary amount of fuel
to all appliances without losing pressure to any appliance.
4
DATA PLATE
ON INSIDE WALL
FIGURE 1
Combustible Construction
Inches (Centimeters)
8.0 (20.4)
2.0 (5.0)
L25-052 Rev. 0 (5/06)
Non-Combustible Construction
Inches (Centimeters)
8.0 (20.4)
0.0 (0.0)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mkg36Mkg48Mkg60Mkg72

Table of Contents