DeWalt D25012-XE Instruction Manual page 11

service centers or other qualified service organizations, always using identical
replacement parts.
ACCESSORIES
WARNING: Since accessories, other than those offered by D
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D WALT, recommended accessories should be used
E
with this product.
Recommended accessories for use with your tool are available at extra cost from
your local service center. If you need any assistance in locating any accessory,
please contact D WALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, VIC 3138
E
Australia or call 1800 654 155 or (NZ) 0800 339258.
MAXIMUM RECOMMENDED CAPACITIES
D25012-XE, D25013-XE
Masonry
Steel
Wood
OPTIMUM CAPACITY
Masonry
Guarantee
Applicable to hand held Power Tools, Lasers and Nailers.
Three Year Limited Warranty
D WALT will repair, without charge, any defects due to faulty materials or
E
workmanship for three years from the date of purchase. Please return the complete
unit, transportation prepaid, to any D WALT Service Centre, or any authorised
E
service station.
For warranty repair information, call (AUS) 1800 654 155 or (NZ) 0800 339258.
This warranty does not apply to
• Accessories
• Damage caused where repairs have been made or attempted by others.
WALT, have not been
E
22 mm (7/8")
13 mm (1/2")
30 mm (1-1/8")
4 mm–13 mm
(5/32"–1/2")
• Damage due to misuse, neglect, wear and tear, alteration or modification.
This warranty gives you specific legal rights and you may have other rights under the
provisions of the Consumer Guarantee Act 1993 (New Zealand only), Trade Practices
Act 1974 and State Legislation (Australia only).
In addition to the warranty, D WALT tools are covered by our:
E
FREE ONE YEAR SERVICE CONTRACT
D WALT will also maintain the tool for free at any time during the first year of
E
purchase. This includes labour, parts and lubrication required to restore the product to
sound mechanical and/or electrical condition. Normal wear parts are not covered in
this service. Carbon brushes worn more then 50% will be replaced.
NOTE: Three Year Warranty is not applicable to items deemed as consumables. Radial
arm saws are covered by a one (1) year warranty only. D
review its warranty policy prior to launch of any new business development products.
30 DAY NO SATISFACTION GUARANTEE
If you are dissatisfied with any D WALT power tool, laser or nailer, for any reason,
E
simply return it to the point of purchase with your sales receipt within 30 days for a
replacement unit or a full refund.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or
are missing, call (AUS) 1800 654 155 or (NZ) 0800 339258 for a free replacement.
9
WALT Reserves the right to
E