Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt D25011K
Summary of Contents for DeWalt D25011K
- Page 1 D25011K...
- Page 2 English Copyright D WALT...
- Page 3 Figure 1 Figure 2...
- Page 4 Figure 3 Figure 4...
-
Page 5: Technical Data
E NG LIS H HEAVY-DUTY SDS PLUS ROTARY HAMMER ® D25011K Congratulations! The vibration emission level given in this information sheet has been measured in accordance with a You have chosen a D WALT tool. Years of standardised test given in EN 60745 and may be experience, thorough product development and used to compare one tool with another. -
Page 6: Ec Declaration Of Conformity
E N G L I SH EC-Declaration of Conformity 2) ELECTRICAL SAFETY Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. D25012, D25013 Unmodified plugs and matching outlets WALT declares that these products described will reduce risk of electric shock. - Page 7 E NG L IS H Do not overreach. Keep proper the working conditions and the work footing and balance at all times. This to be performed. Use of the power tool enables better control of the power tool in for operations different from those unexpected situations.
-
Page 8: Electrical Safety
E N G L I SH Description (fig. 1) • Wear gloves when operating tool or changing bits. Accessible metal parts on the WARNING: Never modify the power tool and bits may get extremely hot during tool or any part of it. Damage or operation. - Page 9 E NG L IS H before adjusting or changing set-ups or Release the mode selector button and check when making repairs. Be sure the trigger that the mode selector switch is locked in switch is in the OFF position. An place.
-
Page 10: Operation
E N G L I SH To release bit, pull the chuck sleeve (e) back and Before using the tool each time, be sure that the remove the bit. lock-on button release mechanism is working freely. For continuous operation, press and hold Fitting a Chuck Adapter and the trigger switch (a);... - Page 11 E NG L IS H Depress mode selector button (f) and turn the DRILLING IN WOOD mode selector (g) to the drill bit symbol for drilling, An SDS Plus ® to round shank adapter chuck is to the hammer symbol for hammering or to the required.
-
Page 12: Maintenance
WALT office at the address indicated in this WARNING: Never use solvents or other manual. Alternatively, a list of authorised DEWALT harsh chemicals for cleaning the repair agents and full details of our after-sales non-metallic parts of the tool. These...