Table of Contents
Advertisement
SlimFit
™
commercial condensing gas
Resetting the Sola control after lockout
SlimFit boiler lockout resolution
1. When a lockout occurs, the Sola control will enable the remote alarm
(if connected), sound its internal alarm (if enabled during setup by the
installer) and show the alarm condition on the display.
2. In an alarm condition, the home page boiler icon will turn red (see
Figure 5).
3. From the home page (boiler on blue background), press the boiler icon
(
) to see the Information page.
a. The History bar will be red and will call out the reason for the
lockout.
b. For more detailed information, you can press the History bar to
see the History log.
4. To silence the alarm and reset the boiler from lockout, press the Control
reset button on top of the boiler (not the low water cutoff reset button).
5. If the problem was a low water cutoff lockout, you will also need to press
the Low water cutoff Reset button on top of the boiler.
Figure 5
Red Boiler icon on Home page
Figure 6
Red history bar on Status page
Part number 550-100-117/0714
History Bar
-
fired water boiler
— User's Manual
If resetting the boiler does not cor-
rect the condition, or if the condition
repeats, call you service technician
to inspect the boiler and correct the
problem.
7
Advertisement
Table of Contents
