Adjusting The Focus - Canon Legria HF R47 Instruction Manual

• When shooting subjects with a strong light source behind them, the
camcorder automatically corrects for the backlight. You can turn off the
automatic backlight correction with the
Correction] setting. Note that the automatic backlight correction is not
available in the following cases.
- In
Standard].
- In
SCN
[ Beach], [

Adjusting the Focus

Autofocus may not work well on the following subjects. In such case,
focus manually.
• Reflective surfaces
• Subjects with low contrast
or without vertical lines
Operating modes:
POINTS TO CHECK
• Adjust the zoom before you start the procedure.
1 Open the manual focus screen.
2 Touch a subject that appears inside the < frame.
• The Touch AF mark (I) will flash and the focusing distance will be
adjusted automatically. You have the option to further adjust the
focus manually as necessary.
• You can touch [D] instead to adjust the focus manually without
activating the Touch AF function.
• The manual focus controls appear.
• Touch [D] again to return the camcorder to autofocus.
3 Touch and hold [F] or [E] to adjust the focus.
Downloaded From VideoCamera-Manual.com Manuals
mode, when using a cinema-look filter other than [Cinema
[ mode, when using the [
Sunset] or [
SCN
>
[< Focus]
> p
Night Scene], [
Spotlight] Special Scene mode.
• Fast moving subjects
• Through wet windows
• Night scenes
Advanced Shooting
>
[Auto Backlight
Snow],
79