To Check Version Of Each Firmware - Onkyo TX-NR717 Service Manual

SERVICE PROCEDURE-2

4. To check version of each Firmware

ON/STANDBY
1. During the POWER ON, please push ON/STANDBY button while pushing down DISPLAY button.
2. The version of main multiprocessor is displayed at FL tube (only 3 seconds).
<e.g.>
1 .1 0 /1 2 7 2 3 AM
3. While the version of main microprocessor is displaying, please push (TONE) + button.
4. FL tube displays by rotation as follows.
<e.g.>
(TONE)
(TONE)
(TONE)
(TONE)
5. Push ON/STANDBY (Power Off).
(TONE) (TONE)
1 .1 0 /1 2 7 2 3 AM
(TONE)
1 .0 7 /1 2 7 1 0 A M 7
(TONE)
1 .0 1 /1 2 7 2 0 A M
(TONE)
1 .0 1 /1 2 3 2 9 A EO
(TONE)
DISPLAY
Version displayed
only for 3 seconds.
Main Microprocessor
DSP
HDMI/Video Microprocessor
VSP (Video Signal Processor)
TX-NR717