Sport Pro Dog Collar Device Components; Replacing The Dog Collar Device Battery; Registering Your Device; Getting More Information - Garmin Sport PRO Owner's Manual

Dog collar device gps
Hide thumbs Also See for Sport PRO:
Table of Contents

Advertisement

7
Verify the gasket is not damaged and is completely seated in
the groove on the front half of the device.
8
Verify the USB gasket is not damaged and is completely
positioned around the USB opening on the back half of the
device.
9
While ensuring the battery wires are not pinched, hold the
back plate and the device firmly together, and replace all
security screws without tightening them.
10
Verify the back plate and the device are aligned with no gaps.
11
Tighten the screws evenly.
12
Verify the gasket is not sticking out of the device.

Sport PRO Dog Collar Device Components

Security screws
Top plate
Battery plate screws
Battery plate
Battery
Gasket
Front enclosure

Replacing the Dog Collar Device Battery

Before you can replace the battery, you must remove all dirt,
water, and debris from the device. You also need a small
Phillips screwdriver and the security screwdriver included in the
battery replacement kit.
1
Remove the six screws from the top plate, and remove the
top plate.
2
Remove the two screws from the battery plate, and remove
the battery plate.
3
Grip the battery connector wires close to the connector, and
pull the connector parallel to the circuit board to disconnect
the battery connector from the device.
4
Remove the battery.
The battery fits tightly. It may be necessary to pry the battery
out of the back plate using a non-sharp, non-metal object.
5
Install the new battery into the front enclosure with the label
side of the battery facing up, and the leading edge of the
battery placed under the charging contact ledge of the
device.
6
Replace the battery plate, and replace and tighten the two
screws.
Device Information
7
Verify the gasket is not damaged and is completely seated in
the groove.
8
With the new battery, connect the battery connector to the
device.
When properly installed, the connector plug snaps into the
port.
9
Replace the front plate, and replace and tighten the six
screws to secure the front plate.
10
Verify the gasket is not sticking out of the device.

Registering Your Device

Help us better support you by completing our online registration
today.
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a photocopy, in a safe
place.

Getting More Information

You can find more information about this product on the Garmin
website.
• Go to www.garmin.com/outdoor.
• Go to http://buy.garmin.com, or contact your Garmin dealer
for information about optional accessories and replacement
parts.

Getting the Owner's Manual

You can get the most recent owner's manual from the web.
1
Go to www.garmin.com/manuals/sportpro.
2
View or download the full owner's manual in your preferred
format.
®
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents