Table of Contents
Advertisement
3D Noise Reduction is mostly applied in low-light conditions. When enabled in a low-light
condition with fast moving objects, trails of after-images may occur. You may then select a lower
strength level or disable the function.
Electronic image stabilizer
Select the checkbox to enable the Electronic image stabilization (EIS) function.
Note that the Preview button has been cancelled, all changes made to image settings is directly
shown on screen. You can click Restore to recall the original settings without incorporating the
changes. When completed with the settings on this page, click Save to enable the setting. You can
also click on Profile to adjust all settings above in a pop-up window for special lighting conditions.
Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to
take effect.
Scene mode
By default, the LPC street mode is selected. If you need to enable the camera for the parking lot
mode, please contact VIVOTEK's technical support.
When the street mode is enabled, WDR Pro will be disabled. The Exposure measurement window
will be the full field of view, and the Exposure mode selection will be in the manual mode.
VIVOTEK
User's Manual - 67
Advertisement
Table of Contents
