Table of Contents
Advertisement
VIVOTEK
Listed below is the color scheme for wires coming fom the IR light units.
Description
IR status DO-
IR status DO+
LED ON/OFF mode DO-
LED ON/OFF mode DO+
Input(V-): 24V AC/DC or 12V DC
Input(V+): 24V AC/DC or 12V DC
Output(V-): Volts same as input
Output(V+): Volts same as input
13.
Prepare two power lines as the 24V inputs for the camera. Connect the input lines from
the enclosure's terminal to that on the camera. Also connect the DO- (black) and the
DO+ (red) lines from the IR unit to the camera's terminal connector. You only need to
connect one pair of LED ON/OFF mode DI wires to the camera.
The LED ON/OFF mode DI connection enables the synchronization of IR light and the
automated day/night switching mechanism on the camera.
14 - User's Manual
Color
Gauge
Orange
(26AWG)
Brown
(26AWG)
Black
(26AWG)
Red
(26AWG)
Orange
(20AWG)
Brown
(20AWG)
Black
(20AWG)
Red
(20AWG)
Advertisement
Table of Contents
