Lan - TP-Link TD-W8901N User Manual

disable the function, please click Disable.
MLD Proxy: The MLD (Multicast Listener Discovery Protocol) Proxy function is enabled by

default. If you want to disable the function, please click Disable.
Dual Stack Lite: Enable the Dual Stack Lite (D-S Lite) function if you need. It is disabled by

default.
4) Bridge Mode
If you select this type of connection, the modem router can be configured to act as a bridging
device between your LAN and your ISP. Bridges are devices that enable two or more networks to
communicate as if they are two segments of the same physical LAN.
Dual Stack Lite: Enable the Dual Stack Lite (D-S Lite) function if you need. It is disabled by

default.
 Note:
After you finish the Internet configuration, please click SAVE to make the settings take effect.
4.3.1.3 IPv4/IPv6
If you select IPv4/IPv6 as IP version, please follow both the
configuration based on different connection types to configure the parameters for WAN ports.

4.3.2 LAN

Choose "Interface Setup→LAN" menu, and you will see the LAN screen (shown in Figure 4-15).
Please configure the parameters for LAN ports according to the descriptions below.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-14
32
4.3.1.1 IPv4 and 4.3.1.2 IPv6