Adjusting The Feet; Electrical Connection; Initial Use - Defy WMY 71283 MLCW User Manual

4.1.6 Adjusting the feet

A
CAUTION:
on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing
and vibration problems.
CAUTION:
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands stable and balanced.
3. Tighten all lock nuts by hand again.

4.1.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any
damages that arise should the product be used without grounding in accordance with local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician
install a 16 Amp fuse.
• The voltage specified in the "Technical specifications" section must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs.
B
CAUTION:

4.1.8 Initial use

C
Use an anti-limescale suitable for washing machines.
Some water might have remained in the product due to the quality control processes in the production. It is not harmful for
the product.
Washing Machine / User's Manual
In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced
Do not use any tools to loosen the lock nuts. Doing so may cause them to become damaged.
Damaged power cables must be replaced by the Authorized Service Agents.
Before first use of the product make sure that preparations are made
which are in line with the "Important Safety and Environment Instructions"
and the instructions in the "Installation" section.
To prepare the product for washing laundry, first operate the Drum
Cleaning programme. If this programme is not built into your machine
then apply the method which is described in section 4.4.2.
9 / EN