Kenwood SB050 series smoothie 2GO Instruction Manual page 4

before using for the first
time
G
Wash the parts: see 'care &
cleaning'.
key
blade assembly
dispensing lid x 2
travel mug x 2
power unit
speed control
to use your smoothie
blender
1 Add ice or frozen ingredients to
the mug .
G
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These
can be added up to the level
marked 'max frozen ingredients'.
2 Add liquid ingredients to the mug.
G
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the mug to the
level marked 'max capacity'.
3 Hold the underside of the blade
unit and lower it onto the mug,
blades down – turn clockwise to
lock .
4 Shake to disperse the ingredients.
5 To fit the assembled mug to the
power unit, turn the mug upside
down and line up the tabs on the
mug with the grooves in the power
unit and then turn clockwise until a
positive click is heard
6 Select the required speed.
G
When blending recipes that include
frozen ingredients turn the speed
control to 'low' for 5 seconds to
start the mixing process, then turn
the speed control to 'high'.
G
Allow the ingredients to blend until
smooth.
7 When the desired consistency is
reached, turn the speed control to
the 'off' position. Turn the mug
anticlockwise to release it from the
power unit.
8 Turn the mug the other way up
and unscrew the blade assembly.
9 Fit and lock the lid by turning
clockwise.
G
G
G
G
G
G
G
G
.
G
G
G
G
G
4
When you want to drink the
smoothie, simply flip open the lid
cover and clip into position
drink can be consumed straight
from the mug.
hints & tips
Note that when the mug is filled to
max capacity (500ml), this is
approximately two servings.
If you don't intend to consume
your smoothie drink immediately,
keep it refrigerated.
Ensure your smoothie drink is thin
enough to be able to drink from
the dispensing lid. To make a
thinner smoothie drink add more
liquid.
Once your smoothie drink has
reached the desired consistency,
you can use the pulse 'P' to
ensure all ingredients are
thoroughly blended. Use the pulse
'P' to operate the power unit in a
start stop action to control the
texture of your drink.
After blending, some drinks may
not be completely smooth due to
seeds or the fibrous nature of
ingredients.
Some drinks may separate on
standing, therefore it's best to
drink them straight away.
Separated drinks should be stirred
before drinking.
important
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
Don't use the Smoothie Blender
as a storage container whilst on
the power unit.
Some liquids increase in volume
and froth during blending e.g milk,
so do not overfill and ensure the
blade assembly is correctly fitted.
To ensure long life of your
Smoothie Blender, never run it
continuously for longer than 30
seconds.
Never blend food that has formed
a solid mass during freezing, break
it up before adding to the mug.
Never blend more than the max
capacities marked on the mug.
. The