Controls; Setting The Clock; Time Defrosting - Magic Chef MCD1611ST Instruction Manual

CONTROLS

SETTING THE CLOCK

When the oven is first plugged in, the display will flash ":0" and a tone will sound. If the AC power
ever goes off, the display shows ":0" when the power comes back on.
CLOCK
3. Enter the correct time of day by pressing the numbers
in sequence.
4. Press CLOCK pad.
CLOCK
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Press the CLOCK pad and re-enter the time.

TIME DEFROSTING

When TIME DEFROST is selected, the automatic cycle divides the defrosting time into periods of
alternating defrost and stand times by cycling on and off.
DEFROST
2. Press number pads for the desired defrosting time.
3. Press START pad.
When you press START pad, the DEFROST indicator starts blinking to show the oven is in the
DEFROST mode. The display counts down the time to show you how much defrosting time is left in the
DEFROST mode. The oven beeps during the defrosting cycle to signal that the food needs to be turned
or rearranged. When the defrosting time ends, you will hear 3 beeps.
1. Press CLOCK pad.
This is a 12 hour clock system.
2. Press CLOCK pad once more.
This is a 24hour clock system.
1. Press DEFROST pad.
NOTE: This oven has multiple clock
system. If you want 12 hour
clock system, omit this step.
The display stops blinking, and the colon
starts blinking. If you selected 12 hour clock
system, this digital clock allows you to set
from 1:00 to 12:59. If you selected 24 hour
clock system, this digital clock allows you to
set from 0:00 to 23:59.
The DEFROST indicator lights and " : 0" is
displayed.
The display will show the numbers in the
order you entered.
NOTE: Your oven can be programmed for
99 minutes 99 seconds.(99:99)
9