Operating Modes - ADJ Flat Par CWWW18 User Instructions

Flat Par CWWW18
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE but-
ton until "dS-X" is displayed, press the UP or DOWN button to display
"dS-2". Now the display will disappear after 10s. Press any button to
turn the display on again. Be advised though that the display will turn off
automatically after 10 seconds.
To set the display press the MODE button until "dS-X" is displayed. Use
the UP or DOWN buttons to select either:
"dS-1" = LED display on at all times.
"dS-2" = LED display shuts off after 10 seconds.

Operating Modes:

The Flat Par CWWW18 has six operating modes:
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the American DJ® Show Designer™.
• Cool White & Warm White Dimmer Mode - Adjust the intensity of
each color to make your own desired color. You can also use strob-
ing in this mode.
• White Preset Mode - Choose 1 of 19 White Preset Colors . You can
also use strobing in this mode.
• Fade Mode - In this mode the colors will fade in and out of each other.
You can also use strobing in this mode.
• Sound-Active mode - The unit will react to sound, chasing through the
built in programs.
• Auto Mode - In this mode the unit will cycle through different modes.
DMX Mode:
Operating through a DMX controller gives the user the freedom to cre-
ate their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as spot lights. The Flat Par
CWWW18 has 3 DMX modes: 3 Channel mode, 4 Channel mode, and a
5 Channel mode. See pages 14-15 for each modes' DMX traits.
1. This function will allow you to control each individual fixture's traits
with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
"XXXX" is displayed. "XXXX" represents the current displayed DMX
Mode and address.
3. Press the SET UP Button to scroll through the 3 DMX Channel
modes. When you have found your desired DMX mode, use the UP
American DJ - www.Americandj.com - Flat Par CWWW18 User Manual Page 7
© ®
Operating Instructions Flat Par CWWW18
or DOWN buttons to select your desired DMX address. The DMX
Channel Modes are listed below.
• To run the 3 Channel Mode, press the MODE button until "1XXX"
is displayed. This is the 3 Channel DMX Mode.
• To run the 4 Channel Mode, press the MODE button until "2XXX"
is displayed. This is the 4 Channel DMX Mode.
• To run the 5 Channel Mode, press the MODE button until "3XXX"
is displayed. This is the 5 Channel DMX Mode.
4. After you have chosen your desired DMX Channel mode plug in
the fixture via the XLR connections to any standard DMX controller.
5. Please see pages 14-15 for DMX values and traits.
Cool White & Warm White Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When "4.XXX" is displayed you are in Cool White dimming mode.
Press the UP and DOWN buttons to adjust intensity.
3. When "5.XXX" is displayed you are in Warm White dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. After you have adjusted the RGB colors to make your desired color
you can then activate strobing by pressing the SET UP button to
enter the Flash (strobe) mode.
5. "7-XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "7-00" (flash off) to "7-20" (fastest flash).
White Preset Mode (Preset Color Temperature):
In this mode you are able to choose one of 19 preset white colors (preset
color temperatures).
1. Plug the fixture in and press the MODE button until "6-XX" is dis-
played. "XX" represents the current color number that is displayed.
There are 19 color temperatures to choose from.
2. Use the UP and DOWN buttons to find your desired preset color.
See the chart on page 10 for the list of color temperatures.
3. After you have found your desired color temperature you can then
activate strobing by pressing the SET UP button to enter the Flash
(strobe) mode.
4. "7-XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "7-00" (flash off) to "7-20" (fastest flash).
Fade Mode:
1. Plug the fixture in and press the MODE button until "8-XX" is dis-
American DJ - www.Americandj.com - Flat Par CWWW18 User Manual Page 8
© ®
Operating Instructions