Troubleshooting - Oregon Scientific DS 9541 Quick Start Manual

Troubleshooting

Problem
Cannot turn on the
camera by pressing the
"power" button.
Photos can not be saved
when taking pictures.
Cannot find removable
disk after connecting the
camera to the computer.
Flash does not work.
The batteries used
up very fast.
The photos are over
exposure
The photos are blurry
Cause Solution
Low battery power. Replace or install the battery
Battery placed at correctly.
wrong polarities.
The memory card or Format the memory in SETUP
built-in memory mode of the camera. Please refer
hasn't been to section 5.3.
formatted properly.
1. Connection 1. Make sure all cable
failure. connections are secured and
2. The mode of the restart the computer if
camera is not set necessary.
to removable disk 2. Set the camera to removable
properly
disk mode, refer to section
6.3.1(system setting, USB
connection).
Battery Power is too Replace with new ALKALINE
low. battery.
Use wrong type of Replace with new ALKALINE
battery. battery.
Set the flash light to Set the Flash light to Auto
in mode
force mode
bright environment.
1. The camera is not 1. Hold the camera steadily until it
held steadily beeps when taking photo.
2. The lens of 2. Clean the lens with soft dry
camera is dirty cloth.
12
.