Troubleshooting - Oregon Scientific DS6310 User Manual

6. Click "Transfer".
7. Photos transferring, this
may take a few moments.
8. Click "Close" when it's
done. The photos are
copied from the camera to
the specified folder.

6 TROUBLESHOOTING

PROBLEM SYMPTOM
No power Camera will
not turn on
Picture-taking Image
appears
blurred or dark
Flash does not
go off as
expected
Camera will
not focus
Cannot take
pictures when
the Shutter
button is
pressed
LIKELY CAUSE
Battery power has
been depleted
The camera or subject
was moving when the
shot was taken
The subject is too
close
The lens is dirty
Flash has not finished
charging
The flash has been
turned off
Subject is not in the
center of the lens
viewfinder or LCD
(preview)
Camera is not turned
on
No space on the SD
card / internal memory
12
SOLUTION
Recharge the internal
battery (section 3)
Hold the camera firmly
Move away from the
subject
Clean the lens with a soft
cloth
Wait until the green LED is
steady
Make sure the flash is set
to AUTOmatic or ON
Move the subject to the
center of the lens
viewfinder or LCD
(preview)
Turn on the camera
Delete unwanted files
(section 3) or insert a new
SD card (section 3)