TechVision DVR-LT04120 User Manual page 66

 Like the single broadcast address of RFC1918
 Can not be used in Internet transmission
 Used for multiple cast broadcast in limited
Except the above mentioned addresses of special meanin
addresses. For example:
Multiple cast IP: 235.8.8.3
Multiple cast PORT: 3666.
5 .3.5.4 PPPoE
PPPoE interface is shown as in Figure 5-14.
Input "PPPoE name" and "PPPoE password"
provider).
Click save button, you need to restart to activate your configuration.
After rebooting, IP camera will connect to internet automatically. The
PPPoE is the DVR dynamic value. You can access this IP to visit the unit.
5.3.5.5 NTP Setup
You need to install S
Windows XP OS, you can use command "net start w32time" to boot up NTP service.
NTP setup interface is shown as in Figure 5-15.
 Host IP: Input your PC address.
 Port: This series DVR supports T
 Update interval: minimum value is 15(Unit: minute)
 Time zone: select your corresponding time zone her
Here is a sheet for your time zone setup.
City /Region Name
London
Berlin
Cairo
Moscow
New Deli
Bangkok
Beijing (Hong Kong)
Tokyo
Sydney
Hawaii
Alaska
Pacific Time (P.T.)
6
Figure 5-14
NTP server (Such as Absolute Time Server) in your PC first. In
CP transmission only. Port default value is 123.
space.
g, you can use other
you get from your ISP (Internet service
e.
Time Zone
GMT+0
GMT+1
GMT+2
GMT+3
GMT+5
GMT+7
GMT+8
GMT+9
GMT10
GMT-10
GMT-9
GMT-8
IP in the
66