TechVision DVR-LT04120 User Manual page 108

Figure 7-29
 Network
Network interface is shown as in Figure 7-30.
This interface includes the following items:
Max: Here you can set max connection amount. The value ranges from 0 to 10. 0
means no network connection is allowed.
TCP port: default setup is 37777. Please note port 37778 is for network UDP port
use only.
HTTP port: default setup is 80.
Transfer: here you can select the priority between fluency/video quality.
 Enable PPPoE
In remote item, enable PPPoE function and then input "PPPoE name" and "PPPoE
password" you get from your ISP (Internet service provider). See Figure 7-30.
Click save button, you need to restart to activate your configuration.
After rebooting, DVR will connect to internet automatically. The IP displayed in the IP
address item is the dynamic value. You can use client-end software to visit current IP
now.
108