TechVision DVR-LT04120 User Manual page 16

Function indication
light
Window switch
7 Enter
Cancel
Shuttle(outer ring)
8
Jog(inner dial)
S/N Name
Channel
1 indication
light
Standby
indication
light
Remote control
2
signal receiver
Function
indication
light
3 Shift
MULT Switch between one-window and multiple-window display modes.
confirm current operation
ENTER go to default button
Go to main menu
ESC Close upper interface or controls.
In real-time monitor mode it works as left/right direction key.
Playback mode, counter clockwise to forward and clock wise to
backward
Up/down direction key.
Playback mode, turn the inner dial to realized frame by frame
playback.
(only applies to some version.)
1
Figure 2-2
Icon Function
When DVR is recording this lamp turns on.
When DVR is standing by, this lamp turns on.
To receive signals from remote control
In preview interface(no other menu), press this button for three
seconds, y
can switch between
←
TV/VGA output(HD1 series DVR has three modesLTV/VGA/60Hz
LCD)
3 4 5
2
6 7 8
16