Advertisement
Main LCD Screen Menu
•To get to this menu, press and release the Inner Main Encoder found just to the left of the Stand-by switch. The
different features of this menu are selected using either the INNER or OUTER encoder and then pressing the
INNER encoder to select that feature.
•LOAD PRESET: Use this feature to scroll through the different presets. When the desired preset is listed on the
screen, press the INNER encoder to select that preset.
•SAVE PRESET: Selecting this feature will save the current preset. When you select this feature, you can then
use the inner encoder to change the location of the preset. This way, if you are working on a preset, you can save
it to a different location as to not overwrite it to keep the original version safe. When you select the location and
press the INNER ENCODER, the screen changes to RENAME MODE. Use the OUTER encoder to select which
character to edit, use the INNER encoder to change the character to rename it. Once you have named the preset
to your liking, pressing the INNER encoder again saves the preset, overwriting whatever was in that location.
•RENAME PRESET: You can rename the preset without editing it. Choosing this feature will go directly to the
above described renaming mode.
•RENAME BANK: The Vypyr Pro's presets are arranged in banks of 4 presets. Not only can you rename indi-
vidual presets, you can also rename the banks as well. The default is ELECTRIC 1, ELECTRIC 2, BASS 1 etc.
Renaming the bank changes how the master LCD displays the name of the bank. The Sanpera Pro footcontroler's
screen does not display the bank name.
•ASSIGN PEDALS: This is in reference to the 2 expression pedals on the Sanpera Pro footcontroller. Press the
INNER encoder to select this feature.
*The first screen selects whether you are editing the Wah (right) or Volume pedal. Use the INNER encod
er to select which pedal to edit.
*Turn the OUTER encoder to the right one position. This screen is where you select which parameter
the pedal is controlling. The fact that each pedal can be used to control any parameter is one of the
coolest features of the amp! Use the INNER encoder to select which parameter in the preset to be
controlled by the pedal.
*Turn the OUTER encoder to the right one more position. This screen is where you assign the UP
VALUE to the pedal. The reason for this is that depending on which parameter you wish to control,
you might only be changing it by 10% or less. All the way up is 127, all the way down is 0. Some exper-
imentation will have to be done each time a preset is edited to set the pedals where you want them. Use
the INNER encoder to select the UP value for the pedal.
*Turn the OUTER encoder to the right one more position. This screen is where you assign the DOWN
VALUE to the pedal. Edit it just like the UP VALUE is edited. When finished, press and release the IN-
NER encoder to save your changes.
Advertisement
