Advertisement
Advertisement
Table of Contents
Related Manuals for Peavey VYPYR PRO
Summary of Contents for Peavey VYPYR PRO
- Page 1 VYPYR® PRO Modeling Amplifier Operating Manual www.peavey.com...
- Page 2 In order for the above two models to meet FCC/ICES requirements, a Steward 28A0592-0A2 ferrite core (or equivalent) must be placed on the USB cable where it exists/connects to the amplifier. Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS • 39305 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com Features and specifications are subject to change without notice.
- Page 3 Recording is a mainstay of the VYPYR Pro design. With the most advanced USB audio system in any VYPYR, the Pro was designed from the beginning for home recording. The VYPYR Pro also features an analog speaker and microphone simulated direct out for recording as well.
- Page 4 • The parameter knobs will illuminate to reflect that model’s settings. • Edit chosen model using the parameter knobs. • The Vypyr Pro will remember your changes even if you change models until you save the preset. • Delay/Reverb Quick Edit Menu •...
- Page 5 Front Panel model 1 model 2 model 3 model 4 high post master User Presets input mode tap/ del/rev bank (outer) VYPYR ® select cancel edit preset aux in phones (inner) standby power push to select shift level feedback room size level PRO-100 HOLD for...
- Page 6 Front Panel continued Master Volume Adjusts the overall loudness of the amplifier. Auxillary Input This input allows for external audio sources, such as a CD or MP3 player. Headphone Jack Output for Headphones, which can also be used as a direct output for recording, if needed. Master LCD Display Screen Displays presets, modes, amp and effects parameters, as well as other information as needed.
- Page 7 1% of the rated output power. MICROPHONE SIMULATED DIRECT INTERFACE - MSDI™ Peavey’s exclusive MSDI™ simulates the sound of a microphone placed approximately 8” from a loud- speaker cone, allowing the user to send an accurate, good quality signal to the mixing console without any acoustic spill from other instruments on stage.
-
Page 8: Midi Out
Allows interaction with a computer. This is important for software updates and operates as an audio source for recording on computer. This USB port also connects the Vypyr Pro to your computer for use with the Vypyr Edit program. Vypyr Edit can be found at http://peavey.com/vypyredit... - Page 9 AMP THAT IT FEEDS IS TURNED OFF. SOME TRIAL AND ERROR WILL BE NECESSARY TO GET THE HANG OF HOW THE SIGNAL CHAIN WORKS IN THE VYPYR PRO. •To edit each model’s parameters, including amp models, press and release the cooresponding model’s encoder (NOTE: pressing and holding the model encoders will bypass that model.
- Page 10 MIDI Out Channel. By selecting this function, each preset can send a specific MIDI Program message out to an external device. By using the Peavey AT- 200 guitar with an optional Feature Pack from Antares, you can open up an almost limitless possibility of combinations of instruments and amplifiers! For more information on Feature Packs for the AT-200, please refer to www.autotuneforguitar.com.
-
Page 11: Delay Menu
Deep Edit Menu Activate the Deep Edit Menu by pressing and holding the Delay/Reverb Edit button for 2 seconds. This menu is actually a series of 4 Sub Menus, including Delay, Reverb, Input and Output menus. Pressing the correspond- ing Model encoder will activate the sub menu. In each menu, the Parameter Knobs are used to change settings. In each menu the OUTER BANK WHEEL and INNER KNOB (except for the Reverb Menu) are also used for various settings. -
Page 12: Reverb Menu
This is the most com- mon usage of this feature. •P2—Wah Intensity—With the Vypyr Pro, even the Wah pedal’s intensity can be adjusted! You could even use the other expression pedal to adjust the intensity, effectively giving you 2 different sounding wah pedals for a given preset! •P3—Noise Gate Input Threshold. -
Page 13: Output Menu
Boost on/off. The INNER KNOB controls what MIDI program# message is sent via MIDI. •P1—Boost Level. No preset Boost level here on the Vypyr Pro, you can program it per preset! Here you can set the boost for anything in between a 2.65dB and 9dB boost. -
Page 14: Model Listing
Model Listing MODEL NAME DESCRIPTION AMPS 650C 6505+® CLEAN Pre-gain Bass Mids Treble Master Volume 6505 6505+® LEAD Pre-gain Bass Mids Treble Master Volume 653C 6534+® CLEAN Pre-gain Bass Mids Treble Master Volume 6534 6534+® LEAD Pre-gain Bass Mids Treble Master Volume C50C CLASSIC®... - Page 15 Model Listing cont. EFFECTS CHORUS speed width feedback tone FLANGER color range rate hold PHASER rate depth tone volume EN-FILT Envelope filter response range sweep threshold TREMOLO rate intensity waveform OCTAVER octave PITCH pitch level REVERSE speed feedback ROTARY depth tone acceleration SLAPBACK...
- Page 16 VYPYR® SANPERA® PRO Footcontroller for VYPYR PRO Operating Manual www.peavey.com...
-
Page 17: Key Features
Featuring direct access to all 4 model locations, plus delay and reverb, the Sanpera Pro unlocks all the power of your Vypyr Pro. The dual expression pedals can be assigned to either the default setting (volume on left, wah on right) or assigned to an alternate effect, for instance pitch control, or rotary speaker speed. -
Page 18: Lcd Display
These four switches allow you to select one of four models within the Preset. Bank Selectors These two switches allow you to scroll through the Vypyr Pro’s Preset Banks. Preset Selectors These selectors allow easy access to your favorite presets. - Page 19 Top Panel continued Delay and Reverb Engage Switches These switches turn the delay and reverb effects of the VYPYR PRO on and off. Rear Panel MIDI OUT FOOTSWITCH A PRODUCT OF PEAVEY (Control to Amplifier) from Amplifier (See Owner’s Manual) ELECTRONICS CORPORATION DESIGNED AND ENGINEERED IN U.S.A.
- Page 20 Holding down the STOP button will erase the loop so that you can start over. With the Vypyr Pro’s looper, you can erase the last loop you created if you are unhappy with it. However, be- cause of how the looper works, you must erase the last loop BEFORE it goes through an entire playback cycle.
- Page 21 Warranty registration and information for U.S. customers available online at www.peavey.com/warranty or use the QR tag below Features and speci cations subject to change without notice. Peavey Electronics Corporation 5022 Hartley Peavey Drive Meridian, MS 39305 (601) 483-5365 FAX (601) 486-1278 Logo referenced in Directive 2002/96/EC Annex IV (OJ(L)37/38,13.02.03 and defined in EN 50419: 2005...