Advertisement
Rear Panel continued
Level Knob
21
Adjusts the volume level of the MSDI™ going to the soundboard.
Ground Lift Button
22
Engage this switch if the mix engineer is hearing a hum in the MSDI™ output. This should eliminate the hum by
removing the ground loop.
MSDI™ XLR Direct Out
23
The MSDI™ XLR output allows direct connection to a soundboard.
EFFECTS LOOP SEND and EFFECTS LOOP RETURN
24
1/4" output jack for supplying signals to external effects or signal processing equipment and 1/4" input for re-
turning signals from external effects or signal processing equipment.
MIDI OUT
25
Sends MIDI preset messages to any external MIDI device, including the Peavey AT-200™ Autotune guitar.
FOOTSWITCH/MIDI IN
26
This enables MIDI signals to be recieved from an external MIDI capable device, and can also be a means of plug-
ging in the optional Sanpera PRO footswitch.
USB PORT
27
Allows interaction with a computer. This is important for software updates and operates as an audio source for
recording on computer.
hj
Advertisement
