TP-Link TD-W9970 User Manual page 42

TD-W9970
IP Address/Subnet Mask: Enter the IP Address and Subnet Mask provided by ISP. If you

forget, you can ask your ISP.
Gateway: Enter the gateway IP address in dotted-decimal notation provided by your ISP.

DNS Server/ Secondary DNS Server: Type in your preferred DNS server.

Default Gateway: Select a WAN Interface from the drop-down list as the IPv4 default

gateway.
6) Bridge
If you select this type of connection, the modem router can be configured to act as a bridging
device between your LAN and your ISP. Bridges are devices that enable two or more networks to
communicate as if they are two segments of the same physical LAN.
300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-15
33