TP-Link TD-W9970 User Manual page 39

TD-W9970
PPP Username/Password/Confirm Password: Enter the User Name, Password and

Confirm Password provided by your ISP. These fields are case-sensitive.
Connection Mode: For PPPoE connection, you can select Always on or Connect on

demand or Connect manually. Connect on demand is dependent on the traffic. If there is no
traffic (or Idle) for a pre-specified period of time, the connection will tear down automatically.
And once there is traffic send or receive, the connection will be automatically on.
Authentication Type: Select the Authentication Type from the drop-down list, the default

method is AUTO_AUTH, and you can leave it as a default setting.
Enable IPv4: Check this box to enable IPv4.

Default Gateway: Select a WAN connection from the drop-down list as the IPv4 default

gateway.
Enable IPv6: Check this box to enable IPv6.

Addressing Type: Select the Addressing Type from the drop-down list.

300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-13
30