TP-Link TD-W9970 User Manual page 34

TD-W9970
DSL Modulation Type:
DSL Modulation Type: The modem router supports two modulation types: ADSL and VDSL,

you can select the corresponding types according to your needs.
ATM Configuration:
VPI (0~255): Identifies the virtual path between endpoints in an ATM network. The valid range

is from 0 to 255. Please input the value provided by your ISP.
VCI (1~65535): Identifies the virtual channel endpoints in an ATM network. The valid range is

from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value
provided by your ISP.
1) Static IP
Select this option if your ISP provides static IP information to you. You should set static IP address,
IP subnet mask, and gateway address in the screen below.
300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-10
25