TP-Link TD-W9970 User Manual page 27

TD-W9970
DSL Modulation Type:
DSL Modulation Type: The modem router supports two modulation types: ADSL and VDSL,

you can select the corresponding types according to your needs.
PTM Configuration:
Enable VLAN ID: Check the box to enable the Virtual LAN ID.

VLAN ID (1~4049): This indicates the VLAN group, and the valid range is from 1 to 4049.

1) Static IP
Select this option if your ISP provides static IP information to you. You should set static IP address,
IP subnet mask, and gateway address in the screen below.
300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-4
18