With Interactive Drive Control
System
Without Interactive Drive Control
System
To turn off both StabiliTrak and
TCS, press and hold the TCS/
StabiliTrak button, located on the
instrument panel, until
illuminate and the appropriate
DIC message is displayed.
See Ride Control System
Messages on page 5 29.
I n f o r ma t i o n P r o v i d e d b y :
Driving and Operating
When StabiliTrak is turned off,
the system will not assist with
directional control of the vehicle
or limit wheel spin. Driving
should be adjusted accordingly.
See StabiliTrak
page 5 18 for more information.
Press and release the TCS/
StabiliTrak button again to turn
the system back on.
If cruise control is being used when
StabiliTrak activates, cruise control
will automatically disengage.
Press the cruise control button to
reengage when road conditions
allow. See Cruise Control on
page 9 39 for more information.
and
9-37
®
OFF Light on
Need help?
Do you have a question about the Regal 2011 and is the answer not in the manual?