Isdn Test; Figure 4-2. Configuration Wizard Isdn Test Window - NETGEAR RH340 Reference Manual

Reference Guide for the Model RH340 Internet Access ISDN Router

ISDN Test

You can test your ISDN settings by clicking on the ISDN Test button in the Configuration Wizard
ISDN Test window (Figure 4-2).
Figure 4-2. Configuration Wizard ISDN Test Window
During the ISDN Test, FirstGear sends the configuration information to the router and resets the
ISDN port. The D LED on the front panel of the router lights. FirstGear instructs the router to
place a loopback call, in which B channel 1 places a call to B channel 2. The two B channel LEDs
should power up together for a few seconds. If the call completes successfully, a message window
opens indicating that the test was successful and the Configuration Wizard ISP Test window
opens. If the call fails, FirstGear displays the error messages from the router.
4-6 Configuring the Router Using FirstGear