NETGEAR RH340 Reference Manual page 23

Table 2-1 lists and describes each LED on the front panel of the router. These LEDs are green
when lit.
Table 2-1. LED Descriptions
Label
PWR (Power)
TEST
ISDN:
D
B1
B2
LAN:
1–4
Phone 1
Phone 2
Hardware Installation
Reference Guide for the Model RH340 Internet Access ISDN Router
Activity Description
On Power is supplied to the router.
Blinking/Off This LED blinks as the router is booting and then turns off,
indicating that the router is functioning properly.
Blinking The router's ISDN port is unconfigured or cannot
synchronize with the attached ISDN line.
On The router is successfully synchronized with the attached
ISDN line.
On There is an active WAN session on the channel,
or the channel is making or receiving a call.
On There is an active WAN session on the channel,
or the channel is making or receiving a call.
On The numbered LAN port is synchronized with an attached
device.
Blinking Data is being received on the port.
On The device (telephone, fax, or modem) connected
to the PHONE 1 port is in use.
On The device (telephone, fax, or modem) connected
to the PHONE 2 port is in use.
2-3