Battery (Vehicle); Important Safety Notes - Mercedes-Benz E-Class Sedan Operator's Manual

Hide thumbs Also See for E-Class Sedan:
Table of Contents

Advertisement

instrument cluster in the driver's field of
vision.
! Residue from the tire sealant may come
out of the filler hose after use. This could
cause stains.
Therefore, place the filler hose in the plastic
bag which contained the TIREFIT kit.
H
Environmental note
Have the used tire sealant bottle disposed of
professionally, e.g. at a qualified specialist
workshop.
If a tire pressure of 180 kPa (1.8 bar/26 psi)
has been attained after five minutes:
Switch off the tire inflation compressor.
X
Unscrew the filler hose from the valve of
X
the faulty tire.
Stow the tire sealant bottle and the tire
X
inflation compressor.
Pull away immediately.
X
Stop after driving for approximately ten
X
minutes and check the tire pressure with
the tire inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
G
WARNING
If the required tire pressure is not reached
after driving for a short period, the tire is too
badly damaged. The tire sealant cannot repair
the tire in this instance. Damaged tires and a
tire pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
i
In cases such as the one mentioned
above, contact an authorized Mercedes-
Benz Center. Or call 1-800-FOR-MERCedes
(in the USA) or 1-800-387-0100 (in Can-
ada).
Correct the tire pressure if it is still at least
X
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Information placard on the driver's
side B-pillar or the tire pressure table in the
fuel filler flap for values.
To increase the tire pressure: switch on
X
the tire inflation compressor.
To reduce the tire pressure: depress
X
pressure release button E next to pres-
sure gauge F.
When the tire pressure is correct, unscrew
X
the filler hose from the valve of the sealed
tire.
Screw the valve cap onto the tire valve of
X
the sealed tire.
Pull the tire sealant bottle out of the tire
X
inflation compressor.
The filler hose remains attached to the tire
sealant bottle.
Drive to the nearest qualified specialist
X
workshop and have the tire changed there.
Have the tire sealant bottle replaced as
X
soon as possible at a qualified specialist
workshop.
Have the tire sealant bottle replaced every
X
four years at a qualified specialist work-
shop.

Battery (vehicle)

Important safety notes

Special tools and expert knowledge are
required when working on the battery, e.g.
removal and installation. You should there-
fore have all work involving the battery car-
ried out at a qualified specialist workshop.
I n f o r ma t i o n P r o v i d e d b y :
Battery (vehicle)
275
Z

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-class wagon

Table of Contents