Interior Lighting; Replacing Bulbs; At A Glance" - Mercedes-Benz E-Class Sedan Operator's Manual

Switching Adaptive Highbeam Assist
on/off
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To switch on: turn the light switch to Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
The _ indicator lamp in the multifunc-
tion display lights up when it is dark and the
light sensor activates the low-beam head-
lamps.
If you are driving at speeds above approx-
imately 16 mph (25 km/h):
The headlamp range is set automatically
depending on the distance between the
vehicle and other road users.
If you are driving at speeds above approx-
imately 19 mph (30 km/h) and no other
road users have been detected:
The high-beam headlamps are switched on
automatically. The K indicator lamp in
the instrument cluster also lights up.
If you are driving at speeds below approx-
imately 16 mph (25 km/h) or other road
users have been detected or the roads are
adequately lit:
The high-beam headlamps are switched off
automatically. The K indicator lamp in
the instrument cluster goes out. The _
indicator lamp in the multifunction display
remains lit.
To switch off: move the combination
X
switch back to its normal position or move
the light switch to another position.
The _ indicator lamp in the instrument
cluster goes out.

Interior lighting

An overview of the interior lighting and the
overhead control panel can be found in the
"At a glance" section.
In the Digital Operator's Manual you will find
information on the following topics:
Automatic interior lighting control
R
Manual interior lighting control
R
Crash-responsive emergency lighting
R

Replacing bulbs

Important safety notes
G WARNING
Bulbs, lamps and connectors can get very hot
when operating. If you change a bulb, you
could burn yourself on these components.
There is a risk of injury.
Allow these components to cool down before
changing a bulb.
Vehicles with static LED headlamps:
Do not use a bulb that has been dropped or if
its glass tube has been scratched.
The bulb may explode if:
you touch it
R
it is hot
R
you drop it
R
you scratch it
R
Only operate bulbs in enclosed lamps
designed for that purpose. Only install spare
bulbs of the same type and the specified volt-
age.
I n f o r ma t i o n P r o v i d e d b y :
Replacing bulbs
Z
123