Smeg SFPA6309X Owner's Manual page 32

4. Slide out and remove the lamp.
Do not touch the halogen lamp
directly with your fingers, but wrap
it in insulating material.
5. Replace the lamp with one of the same
type (40W).
6. Refit the cover. Ensure the moulded part
of the glass (A) is facing the door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
34
Cleaning and maintenance
Removing and fitting the oven seal
(pyrolytic models excluded)
To remove the oven seal:
• Unhook the clips in the 4 corners then
pull the oven seal outwards.
To install the oven seal:
• Hook the clips in the 4 corners onto the
oven seal.
Oven seal maintenance tips
The seal should be soft and elastic.
• To keep the oven seal clean, use a non-
abrasive sponge and lukewarm water to
wash it.