Table of Contents
Advertisement
Quick Links
We advise you to read this manual carefully, which contains all the instructions for
maintaining the appliance's aesthetic and functional qualities.
For further information on the product: www.smeg.com
Contents
4
4
5
5
5
6
6
6
7
7
8
8
9
10
10
10
11
11
17
22
30
36
41
47
47
47
47
47
47
48
48
49
50
53
57
59
59
59
60
3
Advertisement
Table of Contents
Related Manuals for Smeg SFPA6301TVX
Summary of Contents for Smeg SFPA6301TVX
-
Page 1: Table Of Contents
4.11 Extraordinary maintenance 5 Installation 5.1 Electrical connection 5.2 Cable replacement 5.3 Positioning We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com... -
Page 2: Instructions
Instructions 1 Instructions • Do not try to repair the appliance yourself or without the intervention 1.1 General safety instructions of a qualified technician. • If the power supply cable is Risk of personal injury damaged, contact technical • During use the appliance and its support immediately and they will accessible parts become very hot. -
Page 3: Manufacturer Liability
Instructions 1.4 Disposal For this appliance This appliance must be disposed of • Ensure that the appliance is switched off separately from other waste before replacing the bulb. (Directives 2002/95/EC, 2002/ • Do not rest any weight or sit on the open 96/EC, 2003/108/EC). -
Page 4: Identification Plate
Instructions Our appliances are packed in non- 1.7 How to read the user manual polluting and recyclable materials. This user manual uses the following reading • Deliver the packing materials to the conventions: appropriate recycling centre. Instructions Plastic packaging General information on this user Danger of suffocation manual, on safety and final disposal. -
Page 5: Description
Description 2 Description 2.1 General Description 1 Control panel 5 Fan 2 Oven light 6 Rack/tray support frames 3 Seal Frame shelf 4 Door... -
Page 6: Control Panel
Description 2.2 Control panel 1 Display Cooling fan The touchscreen display allows you to interact with the appliance. Press the icons to access the various available functions. The display will show all operational parameters, such as: selected function, time/temperature settings or pre-set cooking program settings. -
Page 7: Available Accessories
Description 2.4 Available accessories Oven tray Some models are not provided with all accessories. Rack Useful for collecting fat from foods placed on the rack above. Deep tray Useful for supporting containers with food during cooking. Tray rack Useful for collecting fat from foods placed on the rack above and for cooking pies, pizzas, baked desserts, biscuits, etc. -
Page 8: Use
3 Use Improper use Risk of damage to enamelled 3.1 Instructions surfaces High temperature inside the oven • Do not cover the bottom of the oven during use cavity with aluminium or tin foil sheets. Danger of burns • If you wish to use greaseproof paper, place it so that it will not interfere with the •... -
Page 9: Using The Accessories
3.3 Using the accessories Tray rack The tray rack has to be inserted into the tray. Racks and trays In this way fat can be collected separately Racks and trays have to be inserted into the from the food which is being cooked. side guides until they come to a complete stop. - Page 10 (in the example, the program recipe 1 has When first connecting or after the been stored, see “Adding a recipe”). power has been cut for a time it will be necessary to wait a few seconds before you can interact with the appliance.
- Page 11 Cooking functions 4. When the preheating stage is over a buzzer will sound to indicate that the 1. Select the cooking functions icon food can be placed inside the oven. on the “home screen”. It is not recommended to place the dish in the oven during the automatic pre-heat stage.
- Page 12 Changing a function during cooking Modifying the preset temperature 1. Press the function symbol to modify it. 1. Press the displayed temperature to change it. 2. Press the symbol of the new function required. 2. Use the symbols to set the required temperature.
- Page 13 List of cooking functions Fan assisted The operation of the fan, combined with traditional cooking, ensures The combination of the fan and the consistent cooking even with circular heating element, in ECO complex recipes. Perfect for biscuits mode, is particularly indicated for and cakes, even when cooked cooking on a single shelf, with simultaneously on several levels.
- Page 14 Fan forced The combination of the fan and the circular heating element (incorporated in the rear of the oven) allows you to cook different foods on several levels, as long as they need the same temperatures and type of cooking. Hot air circulation ensures instant and even distribution of heat.
-
Page 15: Cooking Advice
3.5 Cooking advice Advice for cooking desserts/pastries and biscuits General advice • Use dark metal moulds: They help to • Use a fan assisted function to achieve absorb the heat better. consistent cooking at several levels. • The temperature and the cooking time •... - Page 16 To save energy 3. Enter the required duration (for example 25 minutes: first touch the minutes box, • Stop cooking a few minutes before the then the numbers 2 and 5). time normally used. Cooking will continue for the remaining minutes with the heat which has accumulated inside the oven.
- Page 17 Timed cooking 4. Press the symbol to confirm. Timed cooking is the function 5. Timed cooking begins. which allows a cooking operation to be started and then ended after a specific length of time set by the user. Activation of timed cooking cancels any minute minder timer which may previously have been 6.
- Page 18 Modifying the data set during timed 3. Enter the time at which you require cooking cooking to end (for example at 7:30 p.m.: first touch the hours box, then the During operation, it is possible to modify numbers 1 and 9; touch the minutes box, timed cooking duration: then the numbers 3 and 0).
- Page 19 7. It will then proceed with the selected Modifying the data set during programmed cooking function. After modifying the cooking duration, the end of cooking time must be re-set. During operation, it is possible to modify programmed cooking duration: 1. Press the symbol 8.
-
Page 20: Special Functions
3.6 Special functions The special functions menu contains some Proving functions like the timer with the oven off, The proving function, using the heat defrosting or cleaning functions. coming from the top, makes it possible to prove all types of Select the special functions icon on dough, guaranteeing perfect results... - Page 21 2. Enter the required duration (for example 25 minutes: first touch the minutes box, ECO pyrolytic (on some models then the numbers 2 and 5). only) When this function is set, the oven executes a pyrolytic cycle at 500°C for a pre-set time. For use in the case of ovens which are not too dirty.
- Page 22 6. If you leave the timer setting screen, the Defrost by weight symbol will be displayed at the top 1. Place the food inside the appliance. left, indicating that a minute minder timer 2. Select defrost by weight from the is active.
- Page 23 6. Select start to start defrosting, or select Preset parameters: change to further modify the set Type Weight (kg) Time parameters. Meat 01h 45m Fish 00h 40m Fruit 00h 45m Bread 00h 20m Defrost by time 1. Place the food inside the appliance. 7.
- Page 24 Proving 5. Press the symbol again to start the defrost by time function. For successful proving, a container of water should be placed in the 6. The defrost by time will start. bottom of the oven. 1. Position the dough to prove on the second level.
- Page 25 6. While the function is in progress, it is Food warming possible to set a timer for a maximum of 1. Position the tray on the first shelf and 4 hours (see “Timer during function”), a place the plates to be warmed at the proving duration (see “Timed cooking”) centre of it.
- Page 26 6. While the function is in progress, it is 3. Press the symbol to start the food possible to set a timer for a maximum of warming function, or press the preset 4 hours (see “Timer during function”), a temperature value to change it (from 40° warming duration (see “Timed cooking”) to 80°...
- Page 27 1. Select sabbath from the “special Sabbath functions” menu. The appliance follows some specific behaviour when operating in this function: • Cooking can proceed indefinitely, it is not possible to set any cooking duration. • No preheating will be performed. •...
-
Page 28: Preset Programs
3.7 Preset programs 2. Select the sub-category of dish to cook and press the name of the sub-category This mode allows you to select a pre-set of dish to confirm. food cooking program. The appliance will automatically calculate the optimum cooking parameters based on the weight entered. - Page 29 5. Use the symbols to enter The time shown does not include the weight (in kilograms) of the dish. the time to reach temperature. Some predefined cooking parameters can be changed at any time, even after cooking has started. 10. A buzzer will sound and a message will be displayed to indicate when to place the food in the oven and enable the start 6.
- Page 30 Ending a preset program Changing a preset program permanently 1. At the end of the preset program, the 1. Inside the selected preset program, appliance will notify the user with a select change from the menu of the selected dish. buzzer and the symbol will flash.
- Page 31 • Cooking function 3. Make the required changes. 4. Press the symbol to store the program. The appliance will ask to confirm the changes which have just been made. • Cooking time If the changes are not confirmed, the preset program will remain unchanged.
- Page 32 Preset program table MEATS Weight Time Subcategory Cooking Function Level Temp. (°C) (Kg) (minutes) rare Fan forced Roast beef medium Fan forced well done Fan forced Pork loin Supercook medium Supercook Lamb well done Supercook Veal Fan assisted Pork spare ribs Fan grill Pork chops Fan grill...
- Page 33 DESSERTS/PASTRIES Weight Time Subcategory Cooking Function Level Temp. (°C) (Kg) (minutes) Ring cake Fan assisted Biscuits Supercook Muffins Fan forced Profiteroles Supercook Meringues Supercook Sponge cake Fan forced Strudel Convection Tarts Convection Brioche bread Fan assisted Croissants Fan forced BREAD Weight Time Subcategory...
-
Page 34: Personal Recipes
LOW TEMPERATURE COOKING Weight Time Subcategory Cooking Function Level Temp. (°C) (Kg) (minutes) Veal Supercook rare Convection Beef well done Convection Pork Supercook Lamb Supercook 3.8 Personal recipes This menu allows you to enter a personal The cooking times in the table refer recipe with the parameters you wish to use. - Page 35 Adding a recipe • Cooking function 1. Select add from the “personal recipes” menu. • Cooking time All parameters which can be changed will be highlighted in yellow on the main screen. • Oven shelf 2. Press the parameter you wish to change: •...
- Page 36 7. The appliance will ask to confirm the 4. Press the symbol to store the recipe. changes which have just been made. The appliance will ask you to enter a Select yes if you wish to store the recipe. name for the recipe you have just created.
- Page 37 Starting a personal recipe Changing a personal recipe 1. Select a previously saved personal 1. Select a previously saved personal recipe from the “personal recipes” menu recipe from the “personal recipes” menu (in the example the recipe, recipe 1, has (in the example the recipe, recipe 1 has been saved).
- Page 38 2. Select the delete option. Delay cooking 1. Select a previously saved personal recipe from the “personal recipes” menu (in the example the recipe, recipe 1 has been saved). 3. Confirm the deletion. Select yes to permanently delete the recipe. 2.
-
Page 39: Settings
Language 4. Press the symbol to confirm. 5. The appliance waits for the delay start Sets the interface language from time. those available. 1. Select language from the “settings” menu. 3.9 Settings The product is set using this menu. 2. Press the symbols to select Select the settings icon on the “home... - Page 40 Clock Control lock Allows the appliance to Sets the time displayed. automatically lock the controls after one minute of normal operation without any intervention 1. Press the symbol and select from the user. clock from the “settings” menu. 1. Press the symbol and select controls lock from the “settings”...
- Page 41 Demo mode (for showrooms only) Eco-Logic This mode deactivates all the This mode allows the appliance to appliance's heating elements, limit the power used. Indicated for while keeping the control panel use of multiple appliances at the active. same time on circuits with limited maximum power.
- Page 42 Sound Keep warm Whenever one of the display This mode allows the appliance to symbols is pressed, the appliance keep cooked food warm (at low beeps. This setting disables these temperatures) after cooking sounds. finishes with a cooking cycle for which a duration has been set (if this is not manually interrupted), 1.
- Page 43 2. To confirm activation of eco-light mode, select yes. The keep warm function will be activated as soon as cooking is finished; this is indicated by a series of beeps (see cooking or function finished). The screen below will be shown on the display after a few minutes.
- Page 44 When no appliance function is active, the Digital clock display will show the current time in digital format. Displays the time in digital format. 1. Press the symbol and select digital clock from the “settings” menu. In the event of a temporary power cut, the digital version will remain selected.
-
Page 45: Cleaning And Maintenance
Cleaning and maintenance 4 Cleaning and maintenance 4.4 Food stains or residues Do not use metallic sponges or sharp 4.1 Instructions scrapers as they will damage the surfaces. Use ordinary non-abrasive products with Improper use the aid of wooden or plastic utensils if Risk of damage to surfaces necessary. -
Page 46: Cleaning The Door Glazing
Cleaning and maintenance 2. Grasp the door on both sides with both 4.7 Removing the internal glass hands, lift it forming an angle of around panes 30° and remove it. For easier cleaning the door internal glass panes can be disassembled. 1. -
Page 47: Cleaning The Inside Of The Oven
Cleaning and maintenance 4.8 Cleaning the inside of the oven 4. Clean the external glass pane and the panes previously removed. Use For the best oven upkeep, clean it regularly absorbent kitchen roll. In case of after having allowed it to cool. stubborn dirt, wash with a damp sponge Take out all removable parts. -
Page 48: Vapour Clean (On Some Models Only)
Cleaning and maintenance Removing racks/trays support frames 4.9 Vapour Clean (on some models only) Removing the guide frames enables the sides to be cleaned more easily. This Vapour Clean is an assisted operation should be performed each time cleaning procedure which the automatic cleaning cycle is used (on facilitates the removal of dirt. - Page 49 Cleaning and maintenance • Pour approx. 40 cc of water onto the Vapour Clean setting floor of the oven. Make sure it does not If the internal temperature is overflow out of the cavity. greater than that required for the Vapour Clean function, the cycle will be stopped immediately and “Internal temperature unsafe,...
- Page 50 Cleaning and maintenance Setting programmed Vapour Clean 3. Press the symbol to confirm. The It is possible to program the Vapour Clean assisted cleaning cycle will start. start time, like any cooking function. 1. After selecting the Vapour Clean special function, press the symbol 4.
-
Page 51: Pyrolytic (On Some Models Only)
Cleaning and maintenance 4.10 Pyrolytic (on some models only) End of the Vapour Clean cycle 5. Open the door and wipe away the less Pyrolytic is an automatic high- stubborn dirt with a microfibre cloth. temperature cleaning procedure 6. Use an anti-scratch sponge with brass which causes dirt to dissolve. - Page 52 Cleaning and maintenance Pyrolytic function setting 4. The appliance is ready to start the automatic cleaning cycle. A warning 1. Select eco pyrolytic or pyrolytic from reminds the user to remove any the “special functions” menu. accessories from inside the oven. Press the symbol to start pyrolytic cleaning.
- Page 53 Cleaning and maintenance Pyrolytic cycle 5. At the end of the pyrolytic cycle, the door remains locked as long as the The display shows “cleaning in progress” temperature inside the oven returns to and the remaining time to indicate that the safety levels.
- Page 54 Cleaning and maintenance Setting of programmed pyrolytic cycle It is possible to program the pyrolytic cycle During the first pyrolytic cycle, start time like all other cooking functions. unpleasant odours may occur due 1. After choosing the duration of the to the normal evaporation of oily pyrolytic function and pressing the manufacturing substances.
-
Page 55: Extraordinary Maintenance
Cleaning and maintenance 4.11 Extraordinary maintenance Do not touch the halogen lamp Live parts directly with your fingers, but wrap Danger of electrocution it in insulating material. • Disconnect the oven power supply. 5. Replace the lamp with one of the same type (40W). - Page 56 Cleaning and maintenance What to do if... The display shows “Error 4”: • The door lock has not properly attached The display is completely off: to the door. This might be because the • Check the mains power supply. door was accidentally opened during •...
-
Page 57: Installation
Installation 5 Installation Fixed connection Fit the power line with an omnipolar circuit 5.1 Electrical connection breaker in compliance with installation regulations. Power voltage The circuit breaker should be located near Danger of electrocution the appliance and in an easily reachable position. -
Page 58: Positioning
Installation 5.3 Positioning Fastening bushings Remove the bushing covers inserted on the Heavy appliance oven front. Danger of crushing injuries • Position the appliance into the cabinet cutout with the help of a second person. Pressure on the open door Risk of damages to the appliance •... - Page 59 Installation Appliance overall dimensions (mm) (top view) (front view) (side view)
- Page 60 Installation Mounting under worktops (mm) Mounting into a column (mm) Make sure that the piece of furniture rear/bottom part has an opening of approx. 60 mm. Make sure that the piece of furniture top/rear part has an opening approx. 35-40 mm deep. 914778092/A...