Beko BKK 2174 User Manual page 19

4 Operating the product
When the steam level is
set to MEDIUM or HIGH,
C
it is recommended to
set the temperature at
MAX level, otherwise
water dropping problem
may occur.
6. The water in the water tank (8)
heats up within 3 minutes. As soon
as the temperature indicator light
goes off and the control indicator
in (3) the steam button remains lit,
the steam iron is ready to use. Hold
the iron in horizontal position on the
garments and press the steam jet
button (13) continue to move the
iron when ironing.
A
WARNING: Never
direct the steam at
people or pets.
When the steam iron-
ing station is switched
on it will produce a
C
'pumping' sound. This
is normal and indicates
that water is being
pumped from the water
tank into the steam iron-
ing station.
7. Set the desired steam pressure
ECO, MEDIUM or HIGH by using the
steam adjusting button (21).
Steam Iron Station / User Manual
– The corresponding control indica-
tor in the steam button blinks
as soon as it is selected. After
approx. 2 minutes the control
indicatorm will remain lit, indicat-
ing that the appliance is ready
for steam ironing.
8. When there is insufficient water left
in the water tank (8) the steam gen-
eration stops and the water filling
indicator (16) lights up, followed by
an audible beep. The control indica-
tor of the selected steam level goes
off. Place the iron onto the storage
base (10) and refill the water tank
(see section -Filling in the water
tank-).
9. After ironing process is complete,
place the iron onto the storage base
(10).
10. Press and hold down the On/
Off switch (20) of the steam iron-
ing station for a few seconds to
switch the steam ironing station off.
Disconnect the power plug.
11. Let the appliance cool down in a
location that is safely out of reach
of children.
A
WARNING: Never
touch the hot soleplate
(9) with bare hands.
Danger of Burns!
19 / 45 EN