Operating The Product; Dry Ironing - Beko BKK 2174 User Manual

4

Operating the product

4.1 Dry ironing

1. Place the appliance on an even, dry
and nonslip surface. The non-slip
feet (22) ensure the stability of the
appliance.
2. The water tank (8) must remain
empty during the dry ironing pro-
cess; otherwise steam pressure
could build up.
3. Insert the power plug (7) into the
wall socket.
4. Push the On/Off switch (20) to
switch on the steam ironing station.
– Power indicator (14) and Filling
Water indicator (16) become red.
5. Depending on the type of fabric,
turn the temperature control dial
(12) to one of the following settings:
Nylon setting 1
Silk setting 1
Wool setting 2
Cotton setting 3
Linen setting MAX
Steam Iron Station / User Manual
A
• The temperature indicator light (3)
lights up red. The red temperature
indicator light (3) remains on while
the iron is heating up. As soon
as the iron reaches the set tem-
perature, the temperature indicator
light (3) goes off. The temperature
indicator light will go on and off
during usage to indicate that the set
temperature is being regulated.
6. The ironing process can begin.
A
7. After the ironing process is com-
plete, place the iron onto the stor-
age base (10).
•
8. Press and hold down the On/Off
•
switch (20) of the steam ironing sta-
••
tion for a few seconds to switch the
•••
steam ironing station off.
MAX
9. Let the appliance cool down in a
location that is safely out of reach of
children.
WARNING: Always read
the care label on your
garment before setting
the temperature.
WARNING: When
taking a break from
ironing, always place
the iron back onto the
storage base (10). The
tip of the soleplate (9)
must always be placed
on the surface of the
storage base (10).
17 / 45 EN