Electrical Requirements - Morphy Richards 562000 Instruction Book

Supreme precision multicooker
Table of Contents

Advertisement

MC562000MEE Rev1.qxp_Morphy Richards Instruction Book 23/03/2015 10:34 Page 3
Treating Scalds
Run cold water over the affected area immediately. Do not stop to
remove clothing, get medical help quickly.
Other Safety Considerations
If the mains lead of this appliance is damaged do not use it.
Telephone Morphy Richards helpline for advice.
The use of accessory attachments not recommended by the
manufacturer may cause damage to the unit.
Do not place the appliance on or near heat sources such as gas
or electric stove, ovens, or burners.
Keep the appliance and the cable away from heat, direct sunlight,
moisture, sharp edges and the like.
When using the unit, ensure the lid is in place before switching
on.
Do not remove the lid until the blades have stopped.
After one operation cycle, you must allow the appliance to cool
down completely, then clean the appliance to revent burning.
Do not operate the appliance continuously.
Be careful if hot liquid is poured into your Multicooker as it can be
ejected out of the appliance due to sudden steaming.

Electrical Requirements

Check that the voltage on the rating plate of your appliance
corresponds with your house electricity supply which must be
A.C. (Alternating Current).
WARNING: THIS APPLIANCE MUST BE EARTHED.
Should the fuse in the mains plug require changing a 13 amp
BS1362 fuse must be fitted.
g
f
d
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents