Chop; Emulsify; Melt; Stir - Morphy Richards 562000 Instruction Book

Supreme precision multicooker
Table of Contents

Advertisement

MC562000MEE Rev1.qxp_Morphy Richards Instruction Book 23/03/2015 10:36 Page 21

Chop

For use in recipes like pesto.
6 9 Follow the steps in 'To Set-Up Before Use' to set-up your
Multicooker. Place the Chopping Blade (13) onto the Drive Shaft
(14).
7 0 Add your ingredients to the Jug (4) and attach the Lid (2).
7 1 Insert the Measuring Cap (1) into the space in the Lid.
7 2 Press the Mixing Speed Button (29), the Icon (34) will flash. Use
the Increase and Decrease Buttons (25),(26) to adjust the speed
setting. Use a high speed (7-8).
7 3 Press the Timer Button (27) and the first half of the Timer (32) will
flash. Use the Increase and Decrease Buttons to adjust the timer
in minutes. Press the Timer Button again, the second half of the
Icon will flash, use the Increase and Decrease buttons to adjust
the timer in seconds.
7 4 Press the Start Button (24). Your Multicooker will sound and begin
to chop.
7 5 Alternatively, Press the Pulse Button (23) to chop in short bursts at
speed 10. In-between bursts you may need to scrape the sides of
the jug down using a spatula.
7 6 When finished, your Multicooker will sound and display 'END'.
Press the Stop Button (30) and remove the Lid.

Emulsify

7 7 Follow the steps in 'To Set-Up Before Use' to set-up your
Multicooker. Place the Chopping Blade (13) onto the Drive Shaft
(14).
7 8 Add your ingredients to the Jug (4) and attach the Lid (2).
7 9 Insert the Measuring Cap (1) into the space in the Lid.
8 0 Press the Pulse Button (23) to emulsify the oil in short bursts at
speed 10. In between bursts you may need to scrape the sides of
the jug down using a spatula.

Melt

For use in recipes like carrots in parsley butter.
8 1 Follow the steps in 'To Set-Up Before Use' to set-up your
Multicooker. Place the Mixing Paddle (11) onto the Drive Shaft (14).
8 2 Add your ingredients to the Jug (4) and attach the Lid (2).
8 3 Press the Mixing Speed Button (29), the Icon (34) will flash. Use
the Increase and Decrease Buttons (25),(26) to adjust the speed
setting.Use a slow speed to stir the food while melting and
prevent sticking (1-2).
8 4 Press the Temperature Button (28), the Icon (31) will flash. Use the
Increase and Decrease Buttons to adjust the temperature in
celsius to a medium heat, 50 or 60°C.
8 5 Press the Timer Button (27), (if using), and the first half of the Timer
(32) will flash. Use the Increase and Decrease Buttons to adjust
the timer in minutes. Press the Timer Button again, the second
half of the Icon will flash, use the Increase and Decrease buttons
to adjust the timer in seconds. You can use your Multicooker
without setting the timer for a maximum of 30 minutes.
8 6 Press the Start Button (24). Your Multicooker will sound and begin
the cooking process. The °C selected on the LCD display will flash
until it has reached the desired temperature.
8 7 When finished, your Multicooker will sound and display 'END'.
Your Multicooker will slow to speed 1 and continue mixing to
prevent food from sticking to the base of the Jug. Press the Stop
Button (30).
8 8 Remove the Lid by twisting anticlockwise and then lifting away
from the Jug. Angle the Lid away from you when lifting, the
contents will be hot. Allow the water collected on the inside of
the Lid to fall back into the Jug, to avoid drips onto your
Multicooker. Carefully remove the Mixing Paddle from the Jug (if
using).

Stir

8 9 Follow the steps in 'To Set-Up Before Use' to set-up your
Multicooker. Place the Mixing Paddle (11) onto the Drive Shaft (14).
9 0 Add your ingredients to the Jug (4) and attach the Lid (2).
9 1 Press the Mixing Speed Button (29), the Icon (34) will flash. Use
the Increase and Decrease Buttons (25),(26) to adjust the speed
setting.Use a medium speed (5).
9 2 (If using), press the Temperature Button (28), the Icon (31) will
flash. Use the Increase and Decrease Buttons to adjust the
temperature to the required setting.
9 3 Press the Start Button (24). Your Multicooker will sound and begin
to stir.
9 4 When finished, your Multicooker will sound and display 'END'.
Press the Stop Button (30) and remove the Lid.
9 5 Remove the Lid by twisting anticlockwise and then lifting away
from the Jug. If using the heating element, angle the Lid away
from you when lifting, the contents will be hot. Allow the water
collected on the inside of the Lid to fall back into the Jug, to avoid
drips onto your Multicooker. Carefully remove the Mixing Paddle
from the Jug.

Jug (4)

The Jug will get hot during use.
The Jug is not suitable for use in the oven, microwave, freezer or
dishwasher.
You can cook in the Jug without the Lid (2) attached. For safety
reasons, the Pulse (23) and Speed (29) settings will be disabled
with the lid removed. You may need to stir the food in the Jug
manually.

Feature Overview

Standby
After turning your Multicooker on if not used for a few minutes it
will automatically go into standby mode. Press the Standby
Button (22) to use your Multicooker.
Pause
During use, if you need to open the Lid (2) to check progress or
add seasoning, press the Start Button (24) to pause the cooking
process. Press the Start Button again to continue. If after 20
minutes the Start Button has not been pressed, or the programme
has not been cancelled by
pressing the Stop Button (30), your Multicooker will automatically
continue.
g
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents