Setting The Map Units; Selecting Navigational Units Of Measure - Magellan eXplorist 200 Reference Manual

Preferences

Setting the Map Units

In the Map Units option of Preferences you can select which units of measure for navigation
data, the north reference, the coordinate system, and the map datum that will be used by the
eXplorist.

Selecting Navigational Units of Measure

The eXplorist can be set to display navigation data in Miles/Yd/MPH, Miles/Ft/MPH,
NM/Ft/Knots, NM/M/Knots, or KM/KPH.
1. Press MENU.
Use the Arrow joystick to highlight Preferences.
2.
3. Press ENTER.
Use the Arrow joystick to highlight Map Units.
4.
5. Press ENTER.
Use the Arrow joystick to highlight the data field for Nav
6.
Units.
7. Press ENTER.
8. Use the Arrow joystick to highlight the desired navigational units of measure.
9. Press ENTER.
The Map Units screen is displayed with the new Nav Units shown. You can change other
settings or press ESC to return to the Preferences menu.
63
Map Units
Nav Units
Miles/Ft/MPH
North Reference
Magnetic
Coord System
Lat/Lon
Map Datum
WGS84