Table of Contents
Advertisement
Stereo / Bilingual Sound Selection
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing
the Sound Selection button.
Audio Signal
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast
Mode Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Type of broadcast
Mode Indicator
●
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
●
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the
Sound Selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
STEREO
Regular broadcast
Regular + NICAM MONO I
(Standard Audio)
No Indicator
Regular broadcast
(Standard Audio)
No Indicator
MAIN I
SUB II
NICAM
(MAIN I)
STEREO
BILINGUAL or DUAL MONO:
MAIN I / SUB II
MONO
NICAM DUAL MONO
(MAIN I / SUB II)
I
II
STEREO
81
Advertisement
Table of Contents
