Connections
Mains lead and aerial
Mains lead
AC 220-240 V, 50 / 60 Hz
UT50P series:
AC 110-240 V, 50 / 60 Hz
Mains lead
AC 220-240 V, 50 / 60 Hz
XT50P series:
AC 110-240 V, 50 / 60 Hz
■
Mains lead
Push until both
side tabs click
Note
●
Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the correct terminating
●
plug are required.
●
If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial
socket and the TV.
●
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your
particular area and the accessories required.
●
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
14
■
TV
See below "Mains lead"
■
TV
See below "Mains lead"
Make sure that
To remove from the TV:
the mains lead is
securely fixed
Aerial
RF cable
Aerial
RF cable
Press both tabs
and pull on mains
tabs
connector to
release