Table of Contents
Advertisement
6
Select [Connection Test] and access to test
Connection Test
Access
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
■
[WPS(PIN)]
Enter the PIN code to the access point, and then select [Connect]
WPS(PIN)
Please register the following PIN codes on the
wireless access point.
PIN code : 12345678
Select 'Connect' after entering and saving the
settings on the wireless access point.
Connect
■
[Manual]
You can setup SSID, security type, encryption type, and encryption key manually.
Follow the on-screen instructions and set manually.
●
When you use 11n (5 GHz) for the wireless system between the Wireless LAN Adaptor and access point, select
[AES] for the encryption type.
Network Name(SSID) Setting
Please input the network name(SSID).
Network Name(SSID)
XXXXXXX
Update TV's software
Accesses the specific website to update TV's software and search if any software updates are available.
Select [Software Update]
Connection Test
Network Connection
Wired
Wireless Network Settings
IP/DNS Settings
Network Link Settings
Software Update
Access
On
New Software Message
Network Status
select
access
Performs automatic testing of the network connection for the TV. (It takes a
while to test.)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then try again.
If you continue to have difficulty, please contact your internet service provider.
Security Type Settings
Connection will be made with the following settings:-
Network Name(SSID) : XXXXXXX
Please select the security type.
WPA2-PSK
WPA-PSK
Shared key
Open
select
access
●
Follow the on-screen instructions.
63
Advertisement
Table of Contents
