Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
4 Pull out the cover.
5 Remove the assembly screws
6 Remove the assembly screws
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
10
(42" / 50" class) or
(60" class) from the TV.
from the cover.
from the bracket.
from the Back of stand and pull out the neck.
(42" class)
Screw (not supplied)
Diametre: 3 mm
Length: 25-30 mm
Screw hole