Table of Contents
Advertisement
5. Continuous
Press this button to switch the unit into continuous mode.
will appear on the display to indicate continuous mode.
6. Drain Pump
Use this button if the unit will not be in use for an extended period of time. Pressing the drain pump button will remove
water from the pump reservoir, so the unit can be safely moved or stored.
Operating Instructions
1. Start the machine
Press the power key to turn the machine on.
2. Adjust Settings
Use the up and down arrow keys to adjust your desired setpoint (typically 50-55%).
3. Stop the machine
Press the power key again and the machine will stop. Note the fan will continue to operate
for 1 minute after the unit has turned off. NOTE: Do not unplug cord directly to force ma-
chine to stop.
4. Water Drainage
The Horizon XP90 has both automatic and manual draining. During normal operation, the
XP90 will automatically drain as required. If you would like to store or move the machine,
you may press the drain button to drain the water from the pump reservoir. The drain will
operate for 15 seconds each time the button is pushed. IT may be necessary to press the
button more than once to completely empty the reservoir
Horizon Titan XP90 Diagram
•
Front View
7
Hide quick links:
Advertisement
Table of Contents
