Table of Contents
Advertisement
Ducting the dehumidifier allows the unit to be in one room while conditioning an adjacent room. The
inlet/return grille is designed for 12" flex ducting while the supply grille is designed for 6" flex ducting.
Be sure to secure the ducting with tie wrap. Also, keep in mind, that the supply ducting can be screwed
into an adapter if necessary.
•• Maximum total length of duct run= 10'
•
• Maximum length if only ducting inlet or outlet= 6'
•
• To connect 12" return ducting, it may be helpful to:
•
1. Remove inlet grille from end cap
•
2. Connect duct to inlet grille
•
3. Reconnect inlet grille to end cap
•
Note: The supply duct adapter is standard on all units.
Removing Duct Adapter
If it is necessary to remove the adapter,
place hand at bottom of adapter and use
your fingers to press up on base of adapter.
Next, lift hooks out of cover holes, and re-
move adapter from machine.
Flex Duct Installation
Rotate the flex duct counter-
clockwise or simply position
over adapter and secure with
wire tie.
Ducted Applications
Ducting Installation
Installing Duct Adapter
To install adapter, line up with
holes on the side of unit and
push up from base of adapter.
Flex Duct Removal
Rotate flex duct clockwise or
remove wire tie and slide duct
off adapter.
10
Hide quick links:
Advertisement
Table of Contents
