Page 3
Chapter 1 Installation Accessories Check After you open the outer package, make sure that the following accessories are contained in the package: ‧ST7610 Series product body ‧AC Power cord ‧eSATA Cable ‧User Manual ‧Accessories Kit Make sure the related accessories and the product body are not damaged or missing. If you have any questions, contact the distributor or sales.
Hardware Installation After verifying that the product body and related accessories are not missing or damaged, please follow the following procedures to complete the hardware assembly Step 1 Open the outer package and take out the product body. (Make sure the related accessories and the product body are not damaged or missing.
Page 5
Hardware installation is completed. You can power on the system to start the related setup and application. Note : 1. Make sure your SATA adapter card supports the port multiplier function, if not, it might not detect the ST7610-4S-S2P system correctly 2.
Page 6
Step 2 Enter the “Disk Management” and Select the newly added HD drive, and start “initializing” the HD. After the initialization is done, you can “format” the HD as a desired one according to your preference or need. After the formation, you can start using the HD device Installation...
Page 7
Q : Does ST7610 series require additional driver upon different operating systems? A : No. Users do not need any additional driver in different operating systems. RAIDON built-in systems support a variety of operating systems, e.g. Window XP, Linux and Macintosh, etc.
Need help?
Do you have a question about the ST7610-4S-S2P and is the answer not in the manual?
Questions and answers