Diskout - Toshiba e-bridge Re-Rite Setup Manual

DiskOut

This tab defines the In/Out file path associations defined for the default and email file
capture modes when the delivery rule is set to 1.
InPath source
Displays the file path locations to be polled by e-BRIDGE Re-Rite, as defined on the
InPath tab.
EmailIn source
Displays the email accounts to be polled by e-BRIDGE Re-Rite, as defined on the
EmailIn tab.
DiskOut path
Displays the output locations associated with the InPath and EmailIn sources.
To edit an output location, double-click the path in the list and either type or browse for
a new location.
By default, a separate Disk output path is automatically created for every InPath
source however the folder is not created on your drive please make sure you edit
as per instructions above.
EmailIn - By default, the output location is defined as ...\OutPathForEmailInx, where x
is the number of the EmailIn source.
Control Panel e-Bridge Re-Rite
27