Inpath - Toshiba e-bridge Re-Rite Setup Manual

InPath

This tab applies only when using the default file capture mode.
Specify the locations that e-BRIDGE Re-Rite polls for TIF or PDF (image) files. Two
default file paths are listed; C:\Re-Rite6\InPath1 & C:\Re-Rite6\InPath2.
Use the buttons to add, configure, etc, your polling locations:
Configure
Opens the Configure Data dialog box, where you can define the idle time, that is,
the amount of time, in seconds, that e-BRIDGE Re-Rite waits before polling the
selected location.
New
Opens an edit fields to enable you to add a new file path for e-BRIDGE Re-Rite to
poll for files. Either type a file path or browse for a location.
Delete
Deletes the selected path.
Move Up/Down
Moves the selected path up or down the list.
To edit a path, double-click the file path in the list.
Maximum InPath sources = 50
Control Panel e-Bridge Re-Rite
18