EPS Bio Technology EasyMax Quick Reference Manual page 5

6. Touch the drop to the blood collection
area at the tip of the test strip. Do not
put control solution on the top of test
strip. The meter starts to count down
from 5 seconds and will show the
results.
Be aware that there are Normal and High ranges listed on your test strip bottle. The
Normal and High refer to the three different control solutions that are available. Please
be sure that you are looking at the correct range.
7. Do not remove the test
strip until you confirm
that the reading falls
within the range printed
on the test strip vial.
8. Push the Strip Ejector to eject
the test strip.
9. Dispose properly.
10. Please check if the result on
the display is the same as
audible result.
5