Basic Operations; Pt30 Mobile Computer; Switching On/Waking Up The Pt30 - Newland NLS-PT30 Series Service Manual

6. Basic Operations

6.1 PT30 Mobile Computer

Speaker
Side Key

6.2 Switching On/Waking up the PT30

a. Switch the PT30 on: Properly install the main battery, press and hold the Power key for 3s.
Then the Charge LED will blink red and green and then go off. The LCD display will be turned on.
About 50s later the PT30 will buzz and display the desktop (Fig. 6-2).
Note: To learn how to install the battery, see the NLS-PT30 Series Mobile Computer User
Guide.
b. Wake up the PT30 from the suspend mode: Press and hold the Power key for 3s. Then the
Charge LED will blink red and then go off. The LCD display will be turned on and the PT30 will
display the previous screen.
Scan
Reset
Key
Button
Power Key
Keypad
Scanning Window
Status LED
Charge LED
Display
Fig. 6-1
4
MINI USB Port
Serial Port Interface
Stylus